Backup Lamp: Service and Repair

REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Turn the bulb/socket counterclockwise in order to remove from the backup lamp (2).
3. Remove the bumper fascia.
4. Remove the clips (3) that retain the backup lamp (2) to the fascia (1).
5. Remove the backup lamp (2).

INSTALLATION PROCEDURE
1. Install the backup lamp (2) to the fascia (1).
2. Install the clips (3) in order to retain the backup lamp (2) to the fascia (1).
3. Install the rear bumper fascia.
4. Turn the bulb/socket clockwise in order to connect the socket to the backup lamp (2).
5. Lower the vehicle.