Tail Lamp: Service and Repair

REMOVAL PROCEDURE
1. Remove the rear compartment trim.
2. Remove the nuts (3) that retain the taillamp (1).
3. Disconnect the connector (2).
4. Remove the taillamp (1).

INSTALLATION PROCEDURE
1. Install the taillamp (1).
2. Connect the connector (2) to the taillamp (1).

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Do not rework or alter the reflective surface of the taillamps (1).

3. Install the nuts (3) in order to retain the taillamp (1).

Tighten
Tighten the nuts (3) to 5 N.m (44 lb in). Tighten the nuts in the proper sequence shown in the illustration.

4. Install the rear compartment trim.