Front Suspension

FASTENER TIGHTENING SPECIFICATIONS - FRONT SUSPENSION

Brake Caliper to Knuckle 51 Nm (38 lb. ft.)

Brake Bracket to Strut 17 Nm (13 lb. ft.)

Control Arm Front Nut 190 Nm (140 lb. ft.)

Control Arm Rear Nut 123 Nm (91 lb. ft.)

Drive Axle Nut 145 Nm (107 lb. ft.)

Front Wheel Speed Sensor Bracket to Strut 17 Nm (13 lb. ft.)

Hub and Bearing to Knuckle 95 Nm (70 lb. ft.)

Service Ball Joint to Knuckle 68 Nm (50 lb. ft.)

Stabilizer Shaft Link Nut 17 Nm (13 lb. ft.)

Stabilizer Shaft Bracket Bolt 47 Nm (35 lb. ft.)

Strut Housing Tie Bar Through-Bolts 37 Nm (27 lb. ft.)

Strut Mount Nut 75 Nm (55 lb. ft.)

Strut Mount to Body Nuts 24 Nm (18 lb. ft.)

Strut to Knuckle Nuts 190 Nm (140 lb. ft.)

Tie Rod to Knuckle 47 Nm (35 lb. ft.)
(Do not exceed 70 (52 lb. ft.) to align cotter pin)