Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 1999 >> Regency V6-3.8L VIN K >> Repair and Diagnosis >> Brakes and Traction Control >> Drum Brake System >> Backing Plate >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Backing Plate: Service and Repair

REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Remove the brake drum and components.
3. Disconnect the brake pipe from the wheel cylinder.
4. Disconnect the park brake cable from the backing plate.
5. Remove the hub and bearing bolts.
6. Remove the backing plate.

INSTALLATION PROCEDURE
1. Install the backing plate.
2. Install the hub and bearing with bolts.
3. Connect the park brake cable to the backing plate.

NOTICE: Refer to Fastener Notice in Service Precautions.

4. Connect the brake pipe to the wheel cylinder. Tighten the brake pipe fitting (tube nut).
^ Tighten the brake pipe fitting to 15 Nm (11 ft. lbs.).

5. Install the brake drum and components.
6. Bleed the brake hydraulic system.
7. Adjust the service brakes.
8. Adjust the parking brake.
9. Lower the vehicle.
10. Check for proper brake operation.
pro multis · About Operation CHARM