Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 1999 >> Regency V6-3.8L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Temperature Sensor/Switch: Service and Repair

Removal Procedure





1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Disconnect the wiring harness assembly (224) from the electrical connector (35) in the case.





3. Disconnect the wiring harness assembly (224) from the following components:
^ The 1-2 shift solenoid (315)
^ The 2-3 shift solenoid (315)
^ The torque converter clutch solenoid (315)
^ The torque converter clutch PWM solenoid (325)
^ The wiring harness clip

4. Remove the wiring harness assembly with fluid temperature sensor.





5. Inspect the wiring harness assembly (224) for the following:
^ Cut or pinched wires
^ Cut wire insulation
^ Bent or broken electrical connectors

Installation Procedure





1. Install the wiring harness assembly with fluid temperature sensor.
2. Connect the wiring harness assembly (224) to the following components:
^ The 1-2 shift solenoid (315)
^ The 2-3 shift solenoid (315)
^ The torque converter clutch solenoid (315)
^ The torque converter clutch PWM solenoid (325)
^ The wiring harness clip





3. Connect the wiring harness assembly (224) to the electrical connector (35) in the case.
4. Install the case side cover. Refer to Case Side Cover Replacement.
pro multis · About Operation CHARM