Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Mounted Controls Transmitter: Service and Repair

REMOVAL PROCEDURE
1. Remove the inflatable restraint steering wheel module.
2. Remove the [1][2]steering wheel controls retaining screws from the back of the inflatable restraint steering wheel module.
3. As necessary, remove the horn switch ground wire connector from the grounding bracket to allow removal of the [1][2]steering wheel controls wire harness.
4. Remove the [1][2]steering wheel controls wire harness connector from the retainer.
5. Remove the [1][2]steering wheel controls switches and harness from the inflatable restraint steering wheel module.

INSTALLATION PROCEDURE
1. Install the [1][2]steering wheel controls switches and harness to the inflatable restraint steering wheel module.
2. Install the [1][2]steering wheel controls wire harness connector to the retainer on the inflatable restraint steering wheel module.
3. Route the [1][2]steering wheel controls harness on the inflatable restraint steering wheel module and if necessary, re-connect the horn switch ground connector to the ground bracket.

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Install the [1][2]steering wheel controls retaining screws.

Tighten
Tighten the retaining screws to 2 N.m (18 lb in).

5. Install the inflatable restraint steering wheel module.