Seat Temperature Control Module: Service and Repair

Front Seat Heater Control Module Replacement

Removal Procedure

1. Position the seat forward.
2. Remove the seat adjuster-to-floor bolts and tilt the seat forward.




3. Disconnect the two electric connectors.




4. Cut the tie straps on each side of the module.
5. Remove the heated seat module from the car.

Installation Procedure

1. Position the heated seat module under the seat.




2. Connect the electric connectors.




3. Install the tie straps on each side of the module.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the front bucket seat adjuster-to-floor pan bolts.

Tighten the front bucket seat adjuster-to-floor pan bolts to 42 Nm (31 lb ft).

5. Move the seat to its original position.