Oil Pressure Sensor: Service and Repair

REMOVAL PROCEDURE




1. Raise and support the vehicle.
2. Disconnect the electrical connector (2) from the oil pressure switch (1).
3. Remove the oil pressure switch (1) from the oil filter adapter (3).

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the oil pressure switch (1) to the oil filter adapter (3).

Tighten
Tighten the oil pressure switch to 16 N.m (12 lb ft).

2. Connect the electrical connector (2) to the oil pressure switch (1).
3. Lower the vehicle.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes