Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Orifice Solenoid Replacement

TOOLS REQUIRED
J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE




1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Disconnect the electrical connector from the orifice solenoid.
3. Disconnect the orifice solenoid from the accumulator cover.
4. Disconnect the hose fittings (1, 2) at each end of the valve.
5. Remove the valve.

INSTALLATION PROCEDURE

IMPORTANT: Lubricate the new expansion tube O-ring with mineral base 525 viscosity refrigerant oil before installing into the evaporator hose.




1. Inspect the orifice valve screen and clean or replace as necessary.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the orifice valve to the lines (1, 2) and hand tighten to ensure a good connection.

Tighten
Tighten the fittings to 27 N.m (20 lb ft).




3. Install the orifice valve into the accumulator cover and connect the electrical connector.
4. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
5. Leak test the fittings of the component using the J 39400-A.