Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 2002 >> Intrigue V6-214 3.5L VIN H SFI >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the electrical connector from the ignition control module (ICM).




2. Remove the cover (4) from the ignition coils (3).
3. Remove the screws (1) retaining the ICM.
4. Remove the ignition control module (2).

INSTALLATION PROCEDURE

IMPORTANT: When servicing the ignition system components, use the following recommended procedures:
^ DO NOT re-install any component that has visible signs of damage.
^ Clean all the mounting surfaces before re-installing any components.




1. Install the ignition control module (2) on the ignition coils.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the ICM retaining screws (1).

Tighten
Tighten the screws to 1.1 N.m (10 lb in).

3. Install the cover (4) on the ignition coils (3).




4. Connect the electrical connector to the ignition control module.
pro multis · About Operation CHARM