D.Body Wiring Harness Pn 4331719

BODY WIRING:

D. Body Wiring Harness PN 4331719

1. Route and secure the body wiring harness, PN 4331719, along the right rear crossmember to the left rail using two (2) tie wraps, PN 6015756 (Figure 3-A).
2. Continue routing the body wiring along the existing brake lines on the left frame rail. Secure with fifteen (15) tie wraps equally spaced (Figure 3-A).

3. At the engine compartment, route and secure the body wiring harness to the speedometer cable using one (1) tie wrap and to the bulkhead wiring using one (1) tie wrap (Figure 3-B).

ENGINE COMPARTMENT WIRING:

4. Connect the bare blade terminal of the body harness into vacant cavity #23 of the engine side of the bulkhead connector (Figure 1-D).

5. Reinstall instrument panel half, then engine compartment half of bulkhead connector. Torque to 40 inch pounds.