Toe Adjustment

FRONT




Adjust toe-in by removing the left and right tie rod turnbuckle retaining clips, then turning the left and right turnbuckles the same amount in opposite directions. To reduce toe-in, turn the left turnbuckle toward the front of the vehicle and the right turnbuckle toward the rear of the vehicle. For each half turn of the turnbuckle, toe-in will be adjusted by approximately 0.24 inch.




REAR

Fig. 4 Rear toe adjustment. Colt Vista:

Toe is adjustable by rotating the outer and inner arm mounting bolts. If toe-in is not within specifications, rotate left and right outer arm and inner arm bolts, each by the same amount, to perform adjustment. An adjustment of approximately 0.08 inch (2 mm) will be made when the outer arm and inner arm bolts are turned the equivalent of 1 alignment mark.