System Specifications

Hydraulic brake tubes to all fittings (if not specified) 13-20 Nm (115-170 in lb)
Brake hoses to calipers (banjo bolts) 26-40 Nm (19-29 ft lb)
Front Brake hose intermediate bracket 8-13 Nm (75-115 in lb)
Master cylinder to brake booster mounting nuts 22.6-34 Nm (200-300 in lb)
Brake booster assembly to dash panel 22.6-34 Nm (200-300 in lb)
Wheel cylinder to rear brake support plate 8 Nm minimum(75 in lb minimum)
Wheel cylinder bleed screw 7-11 Nm (60-100 in lb)
Brake support plate to rear axle bolts 88-129 Nm (65-95 ft lb)
Caliper adapter to steering knuckle mounting bolts 176-258 Nm (130-190 ft lb)
Caliper guide pin bolts 34-47 Nm (25-35 ft lb)
Bearing retainer mounting bolt 22.6-34 Nm (200-300 in lb)
Caliper bleed screw 9-19 Nm (80-170 in lb)
Brake light switch mounting bracket screw 8 Nm (75 in lb)
Parking brake assembly mounting 22.6-34 Nm (200-300 in lb)