Operation CHARM: Car repair manuals for everyone.
Home >> Plymouth >> 1995 >> Neon L4-2.0L SOHC >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Testing and Inspection

CAUTION: The work area and vehicle must be between 21°C (70°F) and 32°C (90°F) when testing the switch.

1. Disconnect the 3-wire connector from switch lead located behind the glove box.

Fig. 2 Fin-sensing Cycling Clutch Switch Harness Connector 16:




2. Test for voltage between pin #1 to pin #3 on the wire harness connector. If voltage is detected, jump pin #1 to pin #3 using a jumper wire. Compressor clutch should engage.
3. Check for voltage between pin #1 and pin #2. If no voltage is detected, check fuse and ground circuit.
4. If compressor clutch engages, test for continuity from terminal pin #1 to pin #3 of the switch lead connector. Continuity should be detected. If not, replace the Fin-sensing Cycling Clutch Switch.
pro multis · About Operation CHARM