Windshield Washers - Delayed Washer Fluid Output

NO: 08-11-96

GROUP: Electrical

DATE: Apr. 12, 1996

SUBJECT:
Delayed Washer Fluid Output

MODELS:
1995 - 1996 (PL) Neon

SYMPTOM/CONDITION:

Delayed washer fluid output from one or both washer nozzles when wash button is depressed.

PARTS REQUIRED:

2 4805010 Check Valve, Windshield Washer

REPAIR PROCEDURE:

This bulletin involves the installation of a new windshield washer hose check valve at the nozzle.

1. Disconnect both washer hoses from the washer nozzle.

2. Remove the check valve from one hose.

3. Install the new check valve (white in color) (P/N 4805010) with the end housing the check ball toward the reservoir and the open end toward the nozzle.

4. Repeat steps 2 and 3 for the other side.

5. Connect the hose/check valve assemblies to the nozzle.

6. Verify proper windshield washer operation. If the fluid does not flow properly, check the hose to insure there are no kinks or pinched areas and insure check valve is installed in the proper direction.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No: 23-43-14-90 0.2 Hrs.

FAILURE CODE: P8 - New Part