Outside Rear View Mirror

Side View Mirror Trim Cover:

SIDE VIEW MIRROR TRIM COVER
1. Disengage clips holding side view mirror cover to stanchion.
2. Separate mirror cover from vehicle.
3. Reverse the preceding operation for installation.

SIDE VIEW MIRROR
Removal
1. Remove side view mirror cover.
2. Remove door trim panel and water shield if equipped with power mirror.
3. Disengage wire connector from power mirror motor, if equipped.

Side View Mirror:

4. Remove bolts holding mirror to stanchion.
5. Separate mirror from vehicle.

Installation
1. Position side view mirror on vehicle and install nuts attaching mirror to stanchion.
2. Engage wire connector from power window motor, if so equipped.
3. Install door trim panel and water shield, if equipped with power mirrors.
4. Install side view mirror trim cover.

SIDE VIEW MIRROR STANCHION
Removal
1. Remove side view mirror.
2. Remove bolt holding top of side view mirror stanchion to inner door panel.

Side View Mirror Stanchion:

3. Remove bolts holding stanchion to outer door panel.
4. Remove nut holding stanchion jack-screw to inner door panel.
5. Disengage push-in fastener holding door opening weatherstrip to stanchion.
6. Separate stanchion from vehicle.

Installation
Reverse the preceding operation. Using a Snap-On flare-nut socket (FRXM10) and hex-wrench adjust the jack-screw at bottom of stanchion to achieve proper alignment.