Front Door Weatherstrip: Service and Repair

FRONT DOOR INNER BELT WEATHERSTRIP
Removal
1. Remove door trim panel.

Front Door Inner Belt Weatherstrip:

2. Separate weatherstrip from door.

Installation
1. Push down on weatherstrip to engage channel to door panel.
2. Install door trim panel.

WINDOW INNER BELT STABILIZER
Removal
1. Remove door trim panel.
2. Remove nut holding inner belt stabilizer to door panel.

Inner Belt Stabilizer:

3. Separate inner belt stabilizer from door.

Installation
Reverse the preceding operation. Adjust inner belt stabilizer against glass with enough tension to allow free up and down movement.

Outer Belt Weatherstrip:

FRONT DOOR OUTER BELT WEATHERSTRIP
Removal
1. Open door glass.
2. Pull upward at rear end of outer belt weatherstrip.
3. Separate outer belt weatherstrip from vehicle.

Installation
1. Starting at leading edge of door, press weatherstrip onto door.
2. Operate window and check for interference

Rear Door Inner Belt Weatherstrip:

REAR DOOR INNER BELT WEATHERSTRIP
Removal
1. Remove door trim panel.
2. Pull weatherstrip from top of door panel.
3. Separate weatherstrip from door.

Installation
1. Place inner belt weatherstrip in position on door.
2. Push down on weatherstrip to engage channel to door panel.
3. Install door trim panel.


REAR DOOR OUTER BELT WEATHERSTRIP
Removal
1. Open door glass.
2. Pull upward at rear end of outer belt weatherstrip.

Outer Belt Weatherstrip:

3. Separate outer belt weatherstrip from vehicle.
4. Reverse the preceding operation for installation.