Wiper Switch: Service and Repair

MULTI-FUNCTION SWITCH

WARNING: BEFORE SERVICING A STEERING COLUMN EQUIPPED WITH AN AIRBAG, Refer to RESTRAINT SYSTEMS FOR PROPER AND SAFE SERVICE PROCEDURES.

Turn Signal Multi-Function Switch:

REMOVAL

1. Release hood latch and open hood.
2. Disconnect and isolate battery negative cable.
3. Remove upper and lower steering column shrouds, Refer to Steering for proper procedures.
4. Disconnect wire connector from back of turn signal multi-function switch Turn Signal Multi-Function Switch.
5. Remove screws holding turn signal switch to steering column adapter collar.
6. Remove turn signal switch.

INSTALLATION

Reverse the preceding operation.