Timing Cover: Service and Repair

Removal
1. Disconnect negative cable from auxiliary jumper terminal.
2. Remove accessory drive belts.

Right Inner Splash Shield:

3. Raise vehicle on a hoist and remove right inner splash shield.
4. Remove crankshaft vibration damper.
5. Lower vehicle and place a jack under engine.
6. Remove right engine mount.

Generator And Brackets:

7. Remove generator and bracket.

Right Engine Mount Bracket:

8. Remove right engine mount bracket.

Timing Belt Cover:

9. Remove front timing belt cover.

Installation
1. Install front timing cover.
2. Install engine mount bracket.
3. Install right engine mount.
4. Remove jack from under engine.
5. Install generator bracket. Tighten mounting bolts to 61 Nm (45 ft. lbs.).
6. Install generator.
7. Install crankshaft vibration damper.
8. Install accessory drive belts.
9. Raise vehicle on hoist and install right inner splash shield.
10. Connect negative cable.