Brake Rotor Refinishing Specifications
Rotor Specifications| BRAKE ROTOR | Front | Rear |
| ROTOR TYPE | Vented | Solid |
| ROTOR THICKNESS | 19.87 - 20.13 mm (0.782 - 0.793 in.) | 8.75 - 9.25 mm (0.344 - 0.364 in.) |
| MINIMUM ROTOR THICKNESS Brake rotor minimum thickness is cast/stamped on the outer surface of the rotor hub. This marking includes 0.76 mm (0.030 in.) allowable rotor wear beyond the recommended 0.76 mm (0.030 in.) of rotor refacing. | 18.4 mm (0.724 in.) | 7.25 mm (0.285 in.) |
| ROTOR THICKNESS VARIATION | 0.013 mm (0.0005 in.) | 0.013 mm (0.0005 in.) |
| ROTOR RUNOUT * * TIR - Total Indicator Reading (measured on vehicle) | 0.13 mm (0.005 in.) | 0.13 mm (0.005 in.) |
| ROTOR MICRO-FINISH | 15 - 80 RMS | 15 - 80 RMS |