Thrust Washer/Bearing, A/T

Reaction Shaft Support (No. 1) 1.55-1.60 mm (0.061-0.063 inch)
Rear Clutch Retainer (No. 2) 1.55-1.60 mm (0.061-0.063 inch)
Output Shaft (No. 3) (Select) 1.98-2.03 mm (0.077-0.080 inch)
Output Shaft (No. 3) (Select) 2.15-2.22 mm (0.085-0.087 inch)
Output Shaft (No. 3) (Select) 2.34-2.41 mm (0.092-0.095 inch)
Front Annulus (No. 4) 2.95-3.05 mm (0.116-0.120 inch)
Front Carrier (Nos. 5 & 6) 1.22-1.28 mm 0.0948-0.050 inch)
Sun Gear-Front (No. 7) 0.85-0.91 mm (0.033-0.036 inch)
Sun Gear-Rear (No. 8) 0.85-0.91 mm (0.033-0.036 inch)
Rear Carrier (Nos. 9 & 10) 1.22-1.28 mm (0.0948-0.050 inch)
Rev. Drum (No. 11) 1.55-1.60 mm (0.061-0.063 inch)