Brake Rotor Refinishing Specifications
Brake Rotor Specifications| BRAKE ROTOR | Front | Rear |
| BRAKE ROTOR TYPE | Ventilated | Solid |
| BRAKE ROTOR DIAMETER (14"/15" Standard) | 260 mm (10.24 in.) | 381 mm (15.0 in.) |
| BRAKE ROTOR DIAMETER (15" Heavy Duty) | 283 mm (117.92 in.) | ----- |
| ROTOR THICKNESS | 23.87 - 24.13 mm (0.939 - 0.949 in.) | 12.25 - 12.75 mm (0.482 - 0.502 in.) |
| MINIMUM ROTOR THICKNESS Minimum allowable thickness markings are cast/stamped on an un-machined outer surface of the rotor. These thickness markings include 0.76 mm (0.030 in.) allowable rotor wear beyond the recommended 0.76 mm (0.030 in.) of rotor refacing. | 22.4 mm (0.881 in.) | 11.25 mm (0.443 in.) |
| ROTOR THICKNESS VARIATION | 0.013 mm (0.0005 in.) | 0.013 mm (0.0005 in.) |
| ROTOR RUNOUT * * TIR - Total Indicator Reading (measured on vehicle) | 0.08 mm (0.003 in.) | 0.08 mm (0.003 in.) |
| ROTOR MICRO-FINISH | 15 - 80 RMS | 15 - 80 RMS |