Front Seat Back

FRONT SEAT BACK

REMOVAL

1. Remove seat from vehicle.
2. Remove seat cushion side shields.

Fig. 2:

3. Remove bolts attaching recliner to seat back cushion frame (Fig. 2).

Fig. 3:

4. Remove inboard pivot bolt (Fig. 3).
5. Disconnect any electrical connectors to the seat back, if equipped.
6. Remove seat back from seat cushion.

INSTALLATION

1. Position seat back on cushion.
2. Connect electrical connectors to the seat back, if equipped.
3. Install inboard pivot bolt. Tighten bolt to 40 N.m (30 ft.lbs.) torque.
4. Install bolts attaching recliner to seat cushion frame. Tighten bolts to 12 N.m (9 ft.lbs.) torque.
5. Install seat cushion side shields.
6. Install seat in vehicle.