Seat Back Plastic Panel

SEAT BACK PLASTIC PANEL

REMOVAL

1. Grasp seat back panel at upper corners.
2. Pull rearward on panel until both upper corner attaching clips disengage.
3. Remove the two lower attaching screws.
4. Remove plastic panel from seat back.

INSTALLATION

1. Inspect seat back where attaching clips and screws engage into seat frame for damage or distortion.
2. If seat frame is damage or distorted repair to original flat surface. If damage or distortion beyond repair replace seat frame.
3. Inspect attaching clips for damage or deformation and replace as necessary.
4. Secure upper attachment clips to seat back plastic panel.
5. Place panel into position on seat back and press on panel until clips lock into position.
6. Install lower two screws into panel. Tighten screws to 2N.m.