Technician Safety Information
SAFETY PRECAUTION AND WARNINGSWARNING: EYE PROTECTION SHOULD BE USED WHEN SERVICING RTM AND SMC COMPONENTS. PERSONAL INJURY CAN RESULT.
USE AN OSHA APPROVED BREATHING MASK WHEN MIXING EPOXY, GRINDING RTM AND SMC, AND SPRAYING PAINT OR SOLVENTS IN A CONFINED AREA. PERSONAL INJURY CAN RESULT.
AVOID PROLONGED SKIN CONTACT WITH EPOXY RESIN, PETROLEUM, OR ALCOHOL BASED SOLVENTS. PERSONAL INJURY CAN RESULT.
DO NOT VENTURE UNDER A HOISTED VEHICLE THAT IS NOT PROPERLY SUPPORTED ON SAFETY STANDS. PERSONAL INJURY CAN RESULT.
NOTE:
- When holes must be drilled or cut in body panels, verify locations of internal body components and electrical wiring. Damage to vehicle can result.
- Do not use abrasive chemicals or compounds on undamaged painted surfaces around repair areas. Damage to finish can result.