Fog/Driving Lamp: Adjustments

Fog Lamp Alignment
Prepare an alignment screen. Refer to Alignment Screen Preparation paragraph. Disengage the wire connectors from the back of the headlamp bulbs to disable the headlamps. This Will allow a more accurate projection reading of the fog lamps. Turn on the headlamp switch and actuate the fog lamp switch. A properly aligned fog lamp will project a pattern on the alignment screen 100 mm (4 in.) below the fog lamp center line and straight ahead.

Lamp Alignment Screen:

To adjust fog lamp alignment, rotate the alignment screen located on the bottom of the fog lamp from under the fascia to achieve the specified pattern position.