Operation CHARM: Car repair manuals for everyone.
Home >> Plymouth >> 2000 >> Neon L4-2.0L VIN C >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Vehicle Speed Sensor >> Service and Repair >> Vehicle Speed Sensor and Drive Pinion >> 31TH Automatic Transaxle
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

31TH Automatic Transaxle

REMOVAL

Fig. 44:





1. Remove harness connector from sensor. Be sure weather seal stays on harness connector.
2. Remove bolt securing the sensor in the extension housing.
3. Carefully pull sensor and pinion gear assembly out of extension housing.
4. Remove pinion gear from sensor.
5. Inspect pinion gear for damage (missing teeth, etc.) and replace as necessary.

NOTE: When removing vehicle speed sensor for any reason, a new O-ring MUST be used.

INSTALLATION
1. Install pinion gear to vehicle speed sensor as shown.
2. Install sensor to extension housing using a NEW O-ring.
3. Tighten bolt to 7 Nm (60 inch lbs.).
4. Connect harness connector.

pro multis · About Operation CHARM