Operation CHARM: Car repair manuals for everyone.
Home >> Plymouth >> 2000 >> Neon L4-2.0L VIN C >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Cooling System >> Radiator Cooling Fan Control Module >> Service and Repair >> Disassembly and Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Disassembly and Assembly

The cooling fan module consist of the following three components: fan, fan motor, and shroud.

FAN
There are no repairs to be made to the fan. If the fan is warped, cracked, or otherwise damaged, it must be replace with only the recommended part for adequate strength, performance and safety.

REMOVAL
1. Remove cooling fan module.






2. Remove fan hub retaining nut .
3. Remove fan from motor shaft.

INSTALLATION
1. Install fan on motor shaft.
2. Install fan retaining nut and tighten to 3.8 Nm (34 inch lbs.).
3. Install cooling fan module.

FAN MOTOR
REMOVAL
1. Remove cooling fan module.
2. Remove fan from motor shaft.






3. Remove screw attaching the in-rush current suppressor.
4. Remove screws attaching motor to shroud.
5. Remove fan motor.

INSTALLATION
1. Install fan motor on shroud and tighten screws to 3.8 Nm (34 inch lbs.).
2. Install screw attaching the in-rush current suppressor and tighten to 2.6 Nm (23 inch lbs.).
3. Install fan on motor shaft.
4. Install cooling fan module.

SHROUD
REMOVAL
1. Remove cooling fan module.
2. Remove fan and fan motor as previously described.

INSTALLATION
1. Install fan motor and fan as previously described.
2. Install cooling fan module.

pro multis · About Operation CHARM