Operation CHARM: Car repair manuals for everyone.
Home >> Plymouth >> 2000 >> Neon L4-2.0L VIN C >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Clutch Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Clutch Switch: Service and Repair

REMOVAL
1. Disconnect and isolate battery negative cable.
2. Remove instrument panel assembly.

Fig. 9:





3. Disconnect the clutch interlock/upstop switch connector (Fig. 9).

NOTE: Proper switch harness routing is critical to switch durability. Note the harness routing and location of fasteners intended to keep wires from contacting pedals.

4. Remove the interlock/upstop switch assembly from the brake/clutch pedal bracket assembly by depressing the four plastic wing tabs on each switch.

INSTALLATION
1. Install switches into the pedal bracket assembly as shown in (Fig. 9). Route harness as was prior to removal.
2. Connect interlock/upstop switch connector.
3. Install instrument panel assembly.
4. Connect battery negative cable.
5. Verify proper switch operation.


pro multis · About Operation CHARM