Valve Body

NOTE: Tighten all valve body screws to 5 Nm (40 in. lbs.)

CAUTION: Do not clamp any portion of valve body or transfer plate in a vise. Any slight distortion of the aluminum body or transfer plate will result in sticking valves, excessive leakage, or both. When removing or installing valves or plugs, slide them in or out carefully. Do not use force.

NOTE: TAG ALL SPRINGS AS THEY ARE REMOVED FOR REASSEMBLY IDENTIFICATION.

Fig. 90:

Fig. 91:

Fig. 92:

Fig. 93:

Fig. 94:

Fig. 95:

Fig. 96:

Fig. 97:

Fig. 98:

Fig. 99:

Fig. 100:

Fig. 101:

Fig. 102:

Fig. 103:

Fig. 104: