Shifter A/T: Service and Repair

REMOVAL
1. Disconnect battery negative cable and isolate.

Fig. 18:

2. Loosen set screw and remove knob from shifter handle (Fig. 18).

Fig. 19:

3. Remove the center console assembly as shown in (Fig. 19).

Fig. 20:

4. Remove shifter bezel (Fig. 20).

Fig. 21:

5. Disconnect shift cable from shifter assembly as shown in (Fig. 21).

Fig. 22:

6. Disconnect the shifter/ignition interlock cable from the shifter lever and bracket as shown in (Fig. 22).

Fig. 23:

7. Remove the four shifter assembly-to-floor pan nuts and remove shifter assembly from vehicle (Fig. 23).

INSTALLATION
1. Install gearshift mechanism and tighten the four nuts to 12 Nm (105 inch lbs.) torque.
2. Install gearshift cable as shown in (Fig. 21).
3. Install shifter/ignition interlock cable as shown in (Fig. 22).
4. Install shifter bezel (Fig. 20).
5. Install center console assembly (Fig. 19).
6. Install gearshift knob and tighten set screw to 2 Nm (15 inch lbs.) torque (Fig. 18).