Synchronizer Assemblies

Figure 19:

Figure 20:

Figure 21:

DISASSEMBLY
Refer to Figs. 19 through 21, for synchronizer assemblies.

1. Place 1/2, 3/4 and 5th speed synchronizer assemblies in separate, clean shop towels. Wrap assemblies and press against inner hub.

INSPECTION
Inspect assemblies for excessive wear and/or damage. Replace worn and/or damaged components as required.

ASSEMBLY

CAUTION: Ensure to correctly follow installation procedures described or synchronizer failure and/or damage will result.

Refer to Fig. 19, for 1st/2nd gear synchronizer assembly installation procedure. Refer to Fig. 20, for 3rd/4th gear synchronizer assembly installation procedure. Refer to Fig. 21, for 5th gear synchronizer assembly installation procedure.