Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Removal
Fig. 3 Removing clutch coil assembly:
1.
Refer to ``Compressor Clutch Rotor/Bearing'' procedure, steps 1-4 and remove pulley rotor and bearing assembly.
2.
Mark clutch coil terminal location on compressor front head.
3.
Install J-33023 puller pilot on front head of compressor. Install puller crossbar J-8433-1 with puller legs J-33025,
Fig. 3. 4.
Tighten forcing screw J-8433-3 against puller pilot and remove clutch coil.
