Wiper Gear Box: Service and Repair

Fig.12 Windshield wiper transmission removal (typical):

1. Raise hood, then remove right and left wiper arm and blade assemblies.
2. Remove shroud grille to body attaching screws, then shroud grille.
3. Loosen, but do not remove nuts securing transmission drive link to motor crank arm, then disconnect drive link, Fig. 12.
4. Remove 6 screws attaching wiper transmission to body, Fig. 12.
5. Carefully guide transmission assembly through access hole in upper shroud panel to remove.
6. Reverse procedure to install. Torque transmission drive link nuts to 53---75 in. lbs.