Housing Assembly HVAC: Service and Repair

Heater And A/C Evaporator Module:

Heater & Evaporator Module:

Heater And Evaporator Module Legend (2 Of 2):

Tool Required:
J 38100-C A/C Refrigerant Recovery and Recycling Station

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Instrument panel assembly.
3. Drain cooling system.
4. Recover refrigerant.
5. Hoist vehicle.
6. Block fitting at evaporator and discard O-rings.
7. Heater hoses.
8. Evaporator drain hose.
9. Lower module bolt.
10. Lower vehicle.
11. Top module bolts.
12. Inside module bolts.
13. ECM and bracket.
14. I.P. bracket.
15. Module.

INSTALL OR CONNECT
1. Module.
2. I.P. bracket.
3. ECM and bracket.
4. Inside module bolts.
5. Top module bolts.
6. Raise vehicle.
7. Lower module bolt.
8. Drain hose.
9. Heater hoses.
10. Block fitting at evaporator using new 0-ring seals.
11. Lower vehicle.
12. Instrument panel.
13. Refill cooling system.
14. Negative battery cable.
15. Evacuate and recharge A/C system.
^ Charge system with 1.02kg (2.25 lbs.) of R-12.