AM/FM Stereo and Clock Radio Replacement

Remove or Disconnect
1. Unsnap instrument panel accessory trim plate (15).
2. Electrical connectors from switches (7, 21 or 22), if equipped.
3. Instrument panel accessory trim plate (15).
4. Radio bracket bolts/screws (67).
5. Slide the radio (66) out from the instrument panel.
6. Antenna cable and electrical connectors from radio (66).
7. Radio (66) from vehicle.

Install or Connect

NOTICE: Refer to Service Precautions / Vehicle Damage Warnings / Fastener Requirements.

1. Radio (66) to vehicle.
2. Slide the radio (66) into die instrument panel.
3. Radio bracket bolts/screws (67).
IMPORTANT
^ Install the radio bolts/screws in sequence: lower left first, upper right second, and upper left third.
Tighten
^ Radio bracket bolts/screws to 1.8 Nm (16 lb in).
5. Instrument panel accessory trim plate (15).
6. Snap instrument panel accessory trim plate (15) to instrument panel.