Turn Signals: Service and Repair

Remove or Disconnect
1. Raise and suitably support vehicle.
2. Front bumper fascia lower deflector.
3. Parking lamp bolts/screws (15) from parking and turn signal lamp (14).
4. Parking and turn signal lamp (14) from shelf on front bumper fascia.
5. Front sidemarker lamp bulb (17), parking and turn signal lamp bulb (16) and sockets from front parking and turn signal lamp (14).
6. Front sidemarker lamp bulb (17) and parking and turn signal lamp bulb (16) from sockets.

Install or Connect

NOTICE: Refer to Service Precautions / Vehicle Damage Warnings / Fastener Requirements.

1. Front sidemarker lamp bulb (17) and parking and turn signal lamp bulb (16) to sockets.
2. Front sidemarker lamp bulb (17), parking and turn signal lamp bulb (16) and sockets to parking and turn signal lamp (14).
3. Parking and turn signal lamp (14) to shelf on front bumper fascia.
4. Parking lamp bolts/screws (15) to parking and turn signal lamp (14).
Tighten
^ Bolts/screws (15) to 2.5 Nm (22 lb in).
5. Front bumper fascia lower deflector.
6. Lower vehicle