Second Repair

IMPORTANT
^ The following repair procedures should only be used in the event that the inflatable restraint sensing and diagnostic module mounting fasteners are damaged to the extent that the inflatable restraint sensing and diagnostic module can no longer be properly mounted.

SECOND REPAIR:
1. Remove and discard the stripped fastener.
2. Use a new M6 fastener (part # 11515926) through star washer (part # 11501045) into nut (part # 11503746).

TIGHTEN
^ Fastener to 10.0 N.m (89 lb. in.).
Use hand tools only to achieve fastener torque. This will prevent stripping of the replacement fastener.