Fog/Driving Lamp Switch: Service and Repair

Remove or Disconnect
1. Instrument panel cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel" in this section.
2. Remove the foam tape around the electrical connector.
3. Electrical connector from the fog lamp switch (7).
4. Unsnap the fog lamp switch (7) from the instrument panel cluster trim plate bezel

Install or Connect
1. Fog lamp switch (7) to the instrument panel cluster trim plate bezel.
2. Electrical connector to the fog lamp switch (7).
3. Install the foam tape around the electrical connector.
4. Instrument panel cluster trim plate bezel.