Feature Customization - Entering Programming Mode

To enter the programming mode, perform the following:
1. Turn the ignition ON.
This will disarm the theft system, if necessary.
2. Turn the ignition OFF.
3. Remove the RADIO fuse (#17).
4. Turn the ignition to the ACC position.
The chime will sound to verify the system is in programming mode.
^ When the chime sounds once; exit lighting, delayed illumination, last door closed locking and unlocking prevention can be customized.
^ When the chime sounds twice and the vehicle is equipped with universal theft deterrent; remote lock control verification, arming method, arming verification, driver's door delay and shock sensor enable/disable can be customized.