Case: Service and Repair

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission support.
3. Slowly lower the transmission.
4. Remove the ventilation hose from the ventilation tube at the transmission.





5. Remove the ventilation hose clips from the torque arm.
6. Remove the ventilation hose from the vehicle.


Installation Procedure





1. Install the ventilation hose to the vehicle.
2. Install the first vent hose clip 100 mm (4 inch) behind the rear edge of the torque arm bracket.
3. Install the lower vent hose clip onto the bottom edge of the torque arm.





4. Install the vent hose to the transmission ventilation tube at the transmission.
5. Install the transmission support member.
6. Remove the transmission jack.
7. Lower the vehicle.