Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Injection Pump: Service and Repair

REMOVAL PROCEDURE

AIR Pump Location:




1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the left hand side lower close-out panel.
3. Remove the hoses from the AIR pump.




4. Disconnect the electrical connector from the AIR pump.
5. Disconnect the electrical connector from the AIR Bleed Valve Solenoid.




6. Remove the AIR pump mounting bolts from the bracket.
7. Remove the AIR pump.

INSTALLATION PROCEDURE




1. Install the AIR pump.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the mounting bolts.

Tighten
Tighten the AIR pump bolts to 9.0 N.m (80 lb in).




3. Connect the electric connectors to the AIR pump.

AIR Pump Location:




4. Connect the hoses to the AIR pump.
5. Install the left hand side close-out panel.
6. Lower the vehicle.
7. Check the AIR system for proper operation.