Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Cable: Service and Repair

REMOVAL PROCEDURE






1. Disconnect the spark plug wire at each spark plug.
^ Twist each spark plug 1/2 turn.
^ Pull only on the boot in order to remove the wire from each spark plug.

NOTE: Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.

2. Disconnect the spark plug wire from the ignition coil.
^ Twist each spark plug boot 1/2 turn.
^ Pull only on the boot in order to remove the wires from the ignition coil.

INSTALLATION PROCEDURE
1. Install the spark plug wires at the ignition coil.
2. Install the spark plug wire to each spark plug.
3. Inspect the wires for proper installation:
^ Push sideways on each boot in order to inspect the seating.
^ Reinstall any loose boot.