Front Brake Rotors
| Discard Thickness All brake rotors have a discard dimension cast into the rotor. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the maximum or minimum thickness after refinish specifications | 1.209 Inch (in) |
| Maximum Lateral Runout | 0.005 Inch (in) |
| Maximum Thickness After Refinish | 1.223 Inch (in) |
| Minimum Wear Thickness | 1.223 Inch (in) |
| Rotor Thickness (New) | 1.26 Inch (in) |
| Thickness Variation | 0.0005 Inch (in) |