Rear Brake Rotors
| Discard Thickness All brake rotors have a discard dimension cast into the rotor. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the maximum or minimum thickness after refinish specifications | 0.965 Inch (in) |
| Maximum Lateral Runout | 0.005 Inch (in) |
| Minimum Wear Thickness | 0.960 Inch (in) |
| Rotor Thickness (New) | 1.020 Inch (in) |
| Minimum Thickness After Refinish | 0.980 Inch (in) |
| Thickness Variation | 0.0005 Inch (in) |