Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ambient Temperature Sensor Replacement

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Disconnect the electrical connector from the ambient temperature sensor that is located on the front radiator air baffle.
4. Remove the ambient temperature sensor from the radiator air baffle.

INSTALLATION PROCEDURE




1. Install the ambient temperature sensor to the radiator air baffle.
2. Connect the electrical connector to the ambient temperature sensor.
Verify the electrical connection at the right hand rail near the shock tower base.

3. Lower the vehicle.
4. Connect the negative battery cable.
5. Drive the vehicle at a speed of 32 km/h (20 mph) for approximately one and a half minutes or at a speed of 72 km/h (45 mph) for approximately one minute in order to obtain the ambient update.