Maintenance Indicator Reset

RESETTING THE OIL LIFE MONITOR

DRIVER INFORMATION CENTER (if Equipped)
1. Turn the ignition key to "ON" (engine OFF).

2. Push the accelerator pedal fully to the floor and release three times within five seconds.

- The CHANGE OIL SOON light should flash indicating the system is resetting.

4. After the light has finished flashing, turn the ignition OFF, then start the vehicle.

- If the CHANGE OIL SOON message comes back on, the monitor has not reset. Repeat the procedure.


TRIP COMPUTER (if equipped)
1. Press the MODE button until the light appears next to OIL LIFE.

2. Press and hold the RESET button for approx. three seconds.
The oil life percentage should change to 100%.