Enter Programming

To enter programming with the DIC, perform the following actions:
1. Turn the ignition to RUN.
2. Place the vehicle in PARK.
3. Press the MODE button on the DIC to scroll through the options until PERSONALIZATION PROGRAMMING appears on the display.
4. Press the SELECT button.
5. The DIC displays PRESS SELECT TO SELECT OPTIONS then PRESS RESET TO CHANGE OPTIONS.
6. The DIC then displays DRIVER NUMBER: 1 2. An arrow is shown next to the current driver.
7. Press the RESET button in order to change the driver # for this session of personalization.
8. Press the SELECT button in order to advance to the next option.