Mirror Replacement

Mirror Replacement

Removal Procedure




1. Remove the mirror bezel screw. (2)
2. Remove the mirror bezel (3).
3. Remove the remote handle from the bezel, if equipped.
4. Remove the door trim panel.
5. Disconnect the electrical connector, if equipped.

1. Pull the rosebud clip on the electrical connector from the mirror.
2. Disconnect the electrical connector.




6. Remove the outside rearview mirror nuts (1) from the mirror assembly (2).
7. Remove the outside rearview mirror (2).

Installation Procedure




1. Install the outside rearview mirror.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the outside rearview mirror nuts (1) to the mirror assembly (2).

Tighten the outside rearview mirror nuts (1) to 12 N.m (106 lb in).

3. Connect the electrical connector, if equipped.

1. Connect the electrical connectors together.
2. Press the rosebud clip onto the electrical connector.

4. Install the door trim panel from door.
5. Install the remote handle to the bezel, if equipped.




6. Install the rearview mirror bezel (2).

Important: Ensure that the retainer guides on back of the bezel are aligned with the holes in the applique.

7. Install the rearview mirror bezel screw.

Tighten the Rearview mirror bezel screw to 2 N.m (18 lb in).