Heater Hose Replacement - Inlet

HEATER HOSE REPLACEMENT - INLET

TOOLS REQUIRED
J 38185 Hose Clamp Pliers

REMOVAL PROCEDURE
1. Drain the engine coolant.




2. Use the J 38185 to reposition the inlet heater hose clamp from the quick-connect fitting.
3. Disconnect the inlet heater hose (1) from the quick-connect fitting.




4. Use the J 38185 to reposition the inlet heater hose clamp from the heater core.
5. Disconnect the inlet heater hose from the heater core.
6. Remove the inlet heater hose.

INSTALLATION PROCEDURE
1. Install the inlet heater hose.




2. Connect the inlet heater hose to the heater core.
3. Use theJ 38185 to reposition the inlet heater hose clamp onto the heater core.




4. Connect the inlet heater hose (1) to the quick-connect fitting.
5. Use the J 38185 reposition the inlet hose clamp onto the quick connect fitting.
6. Fill the engine coolant.